Logo BSU

Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот документ: https://elib.bsu.by/handle/123456789/340505
Title: Источник электронов с сеточным плазменным эмиттером для генерации радиально сходящегося электронного пучка
Other Titles: Electron Source with a Grid Plasma Emitter for Generation of a Radially Converging Electron Beam / Torba M.S., Doroshkevich S.Yu., Vorobyov M.S., Grishkov A.A., Koval N.N., Volis M.G.
Authors: Торба, М. С.
Дорошкевич, С. Ю.
Воробьёв, М. С.
Гришков, А. А.
Коваль, Н. Н.
Волис, М. Г.
Keywords: ЭБ БГУ::ЕСТЕСТВЕННЫЕ И ТОЧНЫЕ НАУКИ::Физика
Issue Date: 2025
Publisher: Минск : БГУ
Citation: Взаимодействие излучений с твердым телом : материалы 16-й Междунар. конф., Минск, Беларусь, 22-25 сент. 2025 г. / Белорус. гос. ун-т ; редкол.: В. В. Углов (гл. ред.) [и др.]. – Минск : БГУ, 2025. – С. 521-523.
Abstract: Представлены результаты исследований по генерации радиально сходящегося электронного пучка в источнике с многодуговым сеточным плазменным эмиттером. Проведены эксперименты, ориентированные на повышение амплитуды тока радиально сходящегося пучка и увеличения стабильности работы источника (уменьшение количества пробоев). Проведена серия коллекторных измерений с использованием секционированного коллектора из нержавеющей стали для измерения плотности и распределения тока радиально сходящегося электронного пучка в различных режимах. Результаты, полученные при проведении серии коллекторных измерений, выявили недостатки в используемой конфигурации плазменного эмиттера и способствовали проведению его модернизации. Использование секционированного полого анода позволило снизить неоднородность радиально сходящегося электронного пучка. Приведены сравнения распределения плотности тока радиально сходящегося электронного пучка при различных конфигурация плазменного эмиттера
Abstract (in another language): The article presents the results of studies on the generation of a radially converging electron beam in a source with a grid plasma emitter. Experiments were conducted to change the cell sizes of the emission grid in the grid plasma emitter (0.4 x 0.4 mm and 0.14 x 0.14 mm) in order to increase the amplitude of the current of the radially converging beam while maintaining the stability of the source. The results of the experiments showed a significant increase in the current in the accelerating gap. The dependences of the current in the accelerating gap on the accelerating voltage at different pressures of the working gas were constructed. After processing the results, it can be said that the use of an emission grid with a 0.4 x 0.4 mm cell is not optimal due to the deep penetration of the field from the accelerating gap into the emission region, while the constant selection of electrons does not allow the full use of the hollow anode effect for producing emission plasma. A series of collector measurements were performed using a sectioned stainless steel collector to measure the density and current distribution of a radially converging electron beam at a working gas pressure of p = 4x10-2 Pa and a beam current of Ib = 20 A. The results obtained during a series of collector measurements revealed shortcomings in the used plasma emitter configuration and contributed to its modernization. The arrangement of the cathode units was changed. If previously they were located 3 on each side at the ends of the plasma emitter, then in the modernized plasma emitter they are all located on one side and spaced by 60 degrees. Comparisons of the current density distribution of a radially converging electron beam are given for various plasma emitter configurations
Description: Секция 5. Методы, оборудование, плазменные и радиационные технологии = Section 5. Methods, Equipment, Plasma and Radiation Technologies
URI: https://elib.bsu.by/handle/123456789/340505
ISSN: 2663-9939 (print)
2706-9060 (online)
Sponsorship: Работа выполнена за счет гранта Российского научного фонда (проект № 25-19­00405).
Licence: info:eu-repo/semantics/openAccess
Appears in Collections:2025. Взаимодействие излучений с твердым телом

Files in This Item:
File Description SizeFormat 
521-523.pdf119,98 kBAdobe PDFView/Open
Show full item record Google Scholar



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.