Logo BSU

Please use this identifier to cite or link to this item: https://elib.bsu.by/handle/123456789/233859
Title: Оптимизация спектра кинетических энергий электронов пучка импульсного ускорителя для объемной обработки материалов
Other Titles: Optimization of the electron kinetic energy spectrum of a pulsed accelerator beam for bulk processing of materials / Ivan Egorov, Artem Poloskov, Maksim Serebrennikov, Gennady Remnev
Authors: Егоров, И. С.
Полосков, А. В.
Серебренников, М. А.
Ремнев, Г. Е.
Keywords: ЭБ БГУ::ЕСТЕСТВЕННЫЕ И ТОЧНЫЕ НАУКИ::Физика
Issue Date: 2019
Publisher: Минск : БГУ
Citation: Взаимодействие излучений с твердым телом = Interaction of Radiation with Solids : материалы 13-й Междунар. конф., Минск, Беларусь, 30 сент. – 3 окт. 2019 г. / редкол.: В. В. Углов (отв. ред.) [и др.]. – Минск : БГУ, 2019. – С. 530-532.
Abstract: Работа содержит результаты анализа выделения энергии электронного пучка (дозы) по глубине облучаемого материала в зависимости от спектра кинетических энергий электронов. Восстановлен спектр кинетических энергий электронов до 250 кэВ, обеспечивающий наиболее равномерное (неоднородность менее 1%) распределение дозы по глубине для массовой толщины объекта до 28 мг/см2. Эффективность использования по сравнению с моноэнергетическим пучком 250 кэВ увеличилась с 65 до 75%. Полученный спектр отличается наличием низкоэнергетических электронов и подобен спектру пучка субмикросекундного электронного ускорителя на основе импульсного трансформатора. Результаты могут быть использованы при построении технологической линии объемной обработки материалов на основе импульсных и непрерывных ускорителей с возможностью корректировки амплитуды ускоряющего напряжения.
Abstract (in another language): Continuous electron accelerators are most often currently used to build radiation technologies. In bulk processing of materials with monoenergetic electron beams, the maximum absorbed dose is reached in the depth of the material (not on surface). This leads to a decrease in the efficiency of using the energy transmitted by the electron beam. An overexposed region are also produced. This paper contains the results of an analysis of the electron beam energy release (absorbed dose) over the depth of the irradiated material depending on the spectrum of the kinetic energies of the electrons. A method is described for increasing the efficiency of using a beam by adding electrons with a lower kinetic energy to the spectrum. The spectrum of the kinetic energies of electrons to 250 keV was restored, providing the uniform (inhomogeneity less than 1%) dose distribution in depth for the mass thickness of an object made of polyethylene to 28 mg/cm2. The efficiency of use compared to a 250 keV monoenergetic beam increased from 65 to 75%. The resulting spectrum is characterized by the presence of low-energy electrons and is similar to the spectrum of a beam of a sub-microsecond electron accelerator based on a pulsed transformer. The results can be used to build a technological line for bulk processing of materials based on pulsed and continuous accelerators with the possibility of adjusting the amplitude of the accelerating voltage. For pulsed electron accelerators, a series of pulses with different amplitudes of the accelerating voltage can be used.
Description: Секция 6. Современное оборудование и технологии = Section 6. Advances in Equipment and Technologies
URI: http://elib.bsu.by/handle/123456789/233859
ISSN: 2663-9939
Sponsorship: Работа выполнена при поддержке Томского политехнического университета и с использованием средств гранта РНФ 18-79-00261.
Appears in Collections:2019. Взаимодействие излучений с твердым телом = Interaction of Radiation with Solids

Files in This Item:
File Description SizeFormat 
530-532.pdf333,48 kBAdobe PDFView/Open
Show full item record Google Scholar



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.