Please use this identifier to cite or link to this item:
https://elib.bsu.by/handle/123456789/231648
Title: | Фазовый состав заэвтектического силумина при высокоскоростном затвердевании |
Other Titles: | Phase composition of hypereutectic silumin at rapid solidification / V. G. Shepelevich, O. V. Gusakova, D. V. Alexandrov, I. O. Starodumov |
Authors: | Шепелевич, В. Г. Гусакова, О. В. Александров, Д. В. Стародумов, И. О. |
Keywords: | ЭБ БГУ::ЕСТЕСТВЕННЫЕ И ТОЧНЫЕ НАУКИ::Физика |
Issue Date: | 2019 |
Publisher: | Минск : БГУ |
Citation: | Журнал Белорусского государственного университета. Физика = Journal of the Belarusian State University. Physics. - 2019. - № 2. - С. 96-104 |
Abstract: | Представлены результаты исследования фазового состава заэвтектического силумина Al – 16,0 ат. % Si – 0,2 ат. % Fe. Проведен сравнительный анализ фазового состава образцов, полученных при средней (102 К/с) и сверхвысокой (105 К/с) скорости охлаждения расплава. При средней скорости образцы затвердевали в графитовой изложнице, сверхвысокая скорость охлаждения расплава обеспечивалась при изготовлении фольг методом сверхбыстрой закалки из расплава. Методом рентгеноструктурного и микрорентгеноспектрального анализа установлено, что быстрозатвердевшие фольги состоят из пересыщенного кремнием твердого раствора на основе алюминия, дисперсных частиц кремния и фазы тройного соединения AlFeSi2. Сравнительный анализ результатов рентгеноструктурных и рентгеноспектральных исследований образцов, полученных при разных скоростях охлаждения расплава, позволил установить, что при высокоскоростном затвердевании пересыщенный твердый раствор на основе алюминия содержит до 2 ат. % Si. |
Abstract (in another language): | The paper presents the results of the study of the phase composition of hypereutectic silumin Al – 16.0 at. % Si – 0.2 at. % Fe. A comparative analysis of the phase composition of samples obtained at an average melt cooling rate of 102 K/s and at an ultra-high melt cooling rate of 105 K /s was carried out. At an average rate, the samples solidified in a graphite mold, and the ultra-high melt cooling rate was provided during the production of foils by the method of ultrafast quenching from the melt. It was established by X-ray diffraction and micro X-ray spectral analysis that the rapidly solidified foils consist of an aluminum-based solid solution supersaturated by silicon, dispersed silicon particles and the AlFeSi2 ternary compound phase. Comparative analysis of the results of X-ray diffraction and X-ray spectral studies of samples obtained at different melt cooling rates indicate that, during rapid solidification, the aluminum-based supersaturated solid solution contains up to 2 at. % Si. |
URI: | http://elib.bsu.by/handle/123456789/231648 |
ISSN: | 2520-2243 |
DOI: | 10.33581/2520-2243-2019-2-96-104 |
Licence: | info:eu-repo/semantics/openAccess |
Appears in Collections: | 2019, №2 |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
96-104.pdf | 773,21 kB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.