Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот документ:
https://elib.bsu.by/handle/123456789/233813
Полная запись метаданных
Поле DC | Значение | Язык |
---|---|---|
dc.contributor.author | Егоров, С. В. | |
dc.contributor.author | Еремеев, А. Г. | |
dc.contributor.author | Плотников, И. В. | |
dc.contributor.author | Рыбаков, К. И. | |
dc.contributor.author | Сорокин, А. А. | |
dc.contributor.author | Холопцев, В. В. | |
dc.contributor.author | Быков, Ю. В. | |
dc.date.accessioned | 2019-11-13T10:39:23Z | - |
dc.date.available | 2019-11-13T10:39:23Z | - |
dc.date.issued | 2019 | |
dc.identifier.citation | Взаимодействие излучений с твердым телом = Interaction of Radiation with Solids : материалы 13-й Междунар. конф., Минск, Беларусь, 30 сент. – 3 окт. 2019 г. / редкол.: В. В. Углов (отв. ред.) [и др.]. – Минск : БГУ, 2019. – С. 56-59. | |
dc.identifier.issn | 2663-9939 | |
dc.identifier.uri | http://elib.bsu.by/handle/123456789/233813 | - |
dc.description | Секция 1. Процессы взаимодействия излучения и плазмы с твердым телом = Section 1. Processes of Radiation and Plasma Interaction with Solids | |
dc.description.abstract | Рассмотрены возможности использования электромагнитного излучения миллиметрового диапазона для аддитивного изготовления биосовместимых керамических изделий. Порошковые компакты из гидроксиапатита и оксида циркония, стабилизированного 3% оксида иттрия, спечены до близких к теоретическим плотностей при их объемном нагреве СВЧ излучением с частотой 24 ГГц за значительно более короткие времена, чем при традиционном методе нагрева. Продемонстрирована возможность уплотнения порошковых слоев гидроксиапатита сфокусированным пучком излучения частотой 263 ГГц. | |
dc.description.sponsorship | Работа выполнена при поддержке гранта РФФИ 18-29-11045. | |
dc.language.iso | ru | |
dc.publisher | Минск : БГУ | |
dc.subject | ЭБ БГУ::ЕСТЕСТВЕННЫЕ И ТОЧНЫЕ НАУКИ::Физика | |
dc.title | Аддитивный метод изготовления керамических изделий с использованием нагрева электромагнитным излучением миллиметрового диапазона | |
dc.title.alternative | Additive Manufacturing of Ceramics by Millimeter-Wave Heating / S.V. Egorov, A.G. Eremeev, I.V. Plotnikov, K.I. Rybakov, A.A. Sorokin, V.V. Kholoptsev, Yu.V. Bykov | |
dc.type | conference paper | |
dc.description.alternative | Additive manufacturing of ceramic articles making use of concentrated energy flows attracts the research interest worldwide. Uniform volumetric sintering of 3D-printed structures and layer-by-layer sintering by focused millimeter-wave radiation appear to be promising methods of additive manufacturing. This paper describes the studies of fast millimeter-wave sintering of yttria-stabilized zirconia and hydroxyapatite ceramics. Coefficients of the millimeter-wave absorption and their temperature dependencies are determined for the frequency range 24 − 200 GHz and for the temperature range 20 − 1300 °C. Near-full densities of both compositions were obtained by 24 GHz millimeter-wave sintering with a heating rate of 50 − 100 °C/min and zero hold time. Using a gyrotron millimeter-wave source operating at a frequency of 263 GHz with an output cw power up to 1 kW and the purposely designed electrodynamic focusing structures, intensities of up to 20 kW/cm 2 have been achieved, which was sufficient for fast localized heating of ceramic layers to the solidification temperature. Due to short duration of the millimeter-wave sintering process (which is reduced by a factor of 10 2 − 10 3 compared with the conventional process), the sintered samples had finer microstructure, yet their microhardness and fracture toughness were comparable to those of the conventionally sintered counterparts. | |
Располагается в коллекциях: | 2019. Взаимодействие излучений с твердым телом = Interaction of Radiation with Solids |
Все документы в Электронной библиотеке защищены авторским правом, все права сохранены.